How to operate woodworking engraving machine

Igoldencnc2021

1.Before using the woodworking engraving machine, first make sure that all connections between the machine and the computer are normal, and then turn on the power supply and computer power of the machine.After the system is started, enter Ncstudio CNC System.

.igoldencnc.com/products.html

2. After opening the control system, select  "Back to the mechanical origin " menu. The machine will automatically return to the mechanical origin and correct the system coordinate system.

In some cases, such as after the last normal shutdown, reopen Machine and continue with the last operation, the user does not have to perform a mechanical reset operation. When the Ncstudio system exits normally, the current coordinate information is saved.Also, if the user confirms that the current location is correct,You can also not perform this operation.



3. Before processing, users generally have to load the need to search for the processing procedures, otherwise, some of the functions related to Automatic processing is not valid.Select  "Open (F) | open (O) ... " menu, will play Out of the Windows Standard File Action dialog box, from which you can select the drive, path, and file name where you want to open the file.When you click the  "Open " button, the process loads the system.



4. Determine the original point of the workpiece, manually walk the x and y two directions of the woodworking engraving machine to the desired origin position on the workpiece, select  "Set the current point as the workpiece Origin " menu, or in the coordinate window to The coordinate value of the current position is zeroed so that it is machined at the starting point at the current position when the machining program is executed.